Roku

All posts tagged Roku

32" LG LED TV, Winegard FlatWave indoor amplified antenna, Roku XDS

32″ LG LED TV, Winegard FlatWave indoor amplified antenna, Roku XDS.

Our cord-cutting arsenal:

Ooma Telo internet phone device

5 TVs: LED (2), plasma, flat-tube, ’83 CRT
TiVo Roamio OTA 4-tuner DVR
TiVo Mini extender (2)
Mohu Sky 60 powered outdoor antenna
Winegard FlatWave indoor antenna (2)

Roku streaming media player (3)
Chromecast streaming media player
Blu-ray player

TiVo “Peanut” remote (3)
Logitech Harmony 890 remote
X10 universal 5-in-1 learning remote.
Smartphone

Netflix & Amazon Prime subscriptions

Windows 7 PCs / free Plex &
Emby software to serve
music/TV/movie libraries.
Windows 7 PC / free Windows
Media Center DVR with
recordings on external drive.

Raspberry Pi computer w/ free OSMC, PleXBMC, & ServerWMC software
to access content on Win 7 PCs

X10 analog video sender / receiver
Powerline network adapter (4)
Gigabit Ethernet switch (2)
Kinovo HDMI switch
Powered USB hub (2)

(The list entitled “Our cord-cutting arsenal” appearing at the bottom-right of this blog shows the hardware and software we use for all five of our TVs. Since you can’t tell which items are in each room, I am breaking it down by room, highlighting the hardware used in light yellow, content in white.)

The bedroom is another simple room, hardware-wise (See previous post The workout room TV setup for my wife). The presence of the Roku box gives her access to other content via software.

After a freakish lightning strike, our 1989 20″ tube TV, no great shakes to start with, looked like it was on a bad trip, emitting weird green and purple colors. (See Lightning-pocalypse Saturday.)

Perhaps it could have been degaussed, but it was finally time to upgrade and simplify the setup. (See the old setup in Eliminate a cable box.)

The tube TV went to Best Buy along with the other stricken electronics. (See Best Buy accepts 3 dead electronics items per day)

It was replaced with a new 32″ LED TV.

Now that there was no need for a digital converter box, we could also dispense with the Logitech Harmony 650 remote and use only the new TV’s dedicated remote. A minor problem had been that the Harmony “thought” the old TV was still on after the sleep timer turned it off. Correcting it the next evening was a hassle for my sleepy wife, and therefore not a feather in my cap. (See previous post Logitech Harmony 650.)

We are using only an indoor antenna in the bedroom, rather than another TiVo Mini. A Mini would be great, but that would require us to get an Ethernet cable to the TiVo Roamio in the den. The only way to do that would be to wrap it around the house and add outlets in both rooms. Too much trouble for now.

However, the indoor antenna does well for all channels except RSUTV, which is not a sleeptime favorite, anyway.

The Roku box is now plugged into the new TV with one HDMI cable. When we want to use it, I pull its dedicated remote out of my bedside drawer.

We could watch anything on Netflix or Amazon using the Roku, though we don’t often do it.

But on Sunday nights, my wife sometimes likes to watch old English favorites such as “Keeping Up Appearances” or “Fawlty Towers”. This can be done by selecting the Plex or Emby channels on Roku. Either can stream the programs from one of our own Windows 7 PCs.

I had previously ripped the shows from DVDs and placed them on the PC in the proper file structure and naming convention. Plex and Emby servers running on that PC then were able to retrieve artwork for the Roku onscreen menu. (See Saving YouTubes, viewing with Plex & Emby.)

Why is Emby preferable to Plex for video content in the bedroom? Because we have a first generation Roku in there. The Plex channel app for that older device appears not to have been updated for their latest transcoder server software. Thus it delivers less than optimal video for files in the .mkv format (an .mkv file is the immediate product of MakeMKV, the DVD-ripping software I use).

Plex on the Roku XDS still works well with .mp4 video and .mp3 audio. If I weren’t so lazy, I would convert all those .mkv files to .mp4. But since the Emby app on Roku is doing a fine job handling .mkv transcoded by the Emby server software, why bother? A selling point of both Plex and Emby (though both are free) is supposed to be that they can handle a range of file types. (See 007 24/7 on Plex Media ServerMedia Browser: an alternative to Plex)

Someday we will probably upgrade the Roku box, but it’s not worth doing until another natural disaster strikes, or a newer device offers some extra functionality we want.

The Roku has had no problems with wifi, but I had an extra Powerline adapter on hand, so I am using it instead. Powerline uses your house’s AC wiring as a conduit for Ethernet data. It’s not as high bandwidth as Ethernet cable, but better than wifi for streaming data. See previous post Powerline vs. Ethernet wiring.)

Everybody’s happy now!

3 weeks ago in Cozumel, Mexico. Today in Tulsa, it is 9º F.

How we use our cord-cutting savings.

I could make this the briefest post ever if I just said “TiVo”.

It was certainly the key cord-cutting move for us. (See previous posts Cord-cutting status report #1 and Cutting the TV cable with TiVo Roamio OTA.)

TiVo Roamio OTA

TiVo Roamio

The TiVo Roamio, aside from being an extremely user-friendly DVR and TV tuner, has built-in access to video providers YouTube, Netflix, Amazon Instant Video (including Prime), Hulu Plus, MLB.TV, and VUDU (video on demand service).

Your favorite shows and series from all these can be easily integrated into the “My Shows” list of recordings. (See Streaming video as cable substitute.)

For example, my wife likes to watch the cable show “Hoarders” in the den (her HQ) on Saturday, so we added it to “My Shows”. It appears as any other recorded show, but when you click, all episodes from all seasons are listed. Some episodes are currently available on Netflix and newer ones are available on VUDU. So you pick one, select a provider, and watch. (See TiVo’s new OnePass feature: boon to cord-cutters.)

Of course, the Netflix or other options work only if you have a subscription, the VUDU option only if you have set up an account with them. (Episodes are $1.99-2.99/episode on VUDU, depending on whether you want SD or HD).

These “cloud” shows take up no space on your TiVo’s hard drive.

If you are saving as much as we are, you feel freer to pay for programming you really want. We recently bought the first season of “Better Call Saul” on Amazon Instant Video (it is not available on Amazon Prime currently).

Recently added apps include Plex, iHeart Radio, Pandora, and Spotify (subscription only). These are not integrated in the same way as the video providers, but it is great to have them (especially Plex!)

All these TiVo features combined render other devices such as Roku, Chromecast, Apple TV, or “smart TV” optional for many people.

TiVo’s program guide and interface are superior to the cable box/DVR we had.  More recent iterations such as the Hopper by DISH, Genie by DirecTV, and Contour by Cox created competitive pressure that resulted in the much-improved Roamio series.

Our kitchen TiVo Mini

Our kitchen TiVo Mini

The TiVo service costs $15/month, but a great way to get more for your money is to add a TiVo Mini (no extra charge beyond the cost of the device).

This is a little box that attaches to the mothership by Ethernet cable (or MoCA, Multimedia over Coax). We added two Minis, one for the kitchen, one for the theater room. (See The fruits of cord-cutting: new TVs, TiVo Mini.)

Our TiVo Roamio OTA has 4 tuners, and dynamically allocates them to each Mini as needed. If too many tuners are in use by viewers when a recording starts, viewers will be asked to click Select if they want to continue watching. If not, or if there is no response, the Roamio will take back the tuner and reassign it.

Other models have 6 tuners if 4 is not enough.

Having one recording repository serve every TiVo box makes it convenient to switch rooms in mid-program.

With a TiVo and a good antenna, you might well be able to cut the cable cord while keeping things as simple as they can be! (See previous posts Placing an indoor TV antennaHigh winds can affect TV reception and Mohu Sky 60 antenna review.)


This one got toasted by a lightning srike.

One minor complication you might enjoy is a Roku.

Like the TiVo Roamio, it has YouTube, Netflix, Amazon, Hulu Plus, MLB.TV, VUDU, Plex, Pandora, Spotify and iHeart Radio.

But in addition, it has a multitude of other free channels, some of the best of which are: Crackle, Comedy Central, Sky News International (HD), Shout Factory, Nowhere TV, and Tunein with thousands of free radio stations. (See Comedians in Cars Getting Coffee on Crackle.)

Other subscription channels include Sling TV, HBO GO, ESPN, and Showtime. (See Cord-cutters’ supplement? Introducing Sling TV.)

The remote is simple to operate.

If any of the additional channels grab you, a Roku is a good one-time investment to expand your choices.


Google Chromecast with HDMI extender cable, microUSB cable, USB power supply.

Google Chromecast

Google’s Chromecast device is an alternative to Roku, but smartphone-centric; you “cast” apps up to the big screen.

Castable apps include most of the usual suspects mentioned above (Netflix, Crackle, Plex, Pandora, etc.), with the notable exception of Google competitor, Amazon.

YouTube is an especially natural fit to this mode of viewing.

I previously described my devious method of using a Chrome browser tab and Chromecast to get 24/7 web versions of CNN, msnbc, and CNBC up onto the big screen. (See Use Chromecast to watch online cable news.)

If you are one of those guys who insists on entertaining with his smartphone, Chromecast will give you a much bigger stage to work your magic.


Linksys WRT54G router and Ooma Telo

Our Ooma on the right

An Ooma Telo VoIP (voice over internet) device replaced our landline phone service.

My wife does all her business calling and texting on her iPhone.

But I still like having cordless phones around the house, even though I text with Google Voice on my wifi-only smartphone. I was able to keep our old phone number with a one-time $40 charge.

The voice quality is very good. The only downside I’ve found is a slight delay, similar to cell phones I’ve talked on.

At a monthly cost of less than $4 in taxes, it’s a small indulgence. (See Cord-cutting: Hold the phone!)

Ooma was the first cord-cutting move documented in this blog.


There is more to learn and remember as you expand.

There are optional but more complicated things you can do.

Run free Plex or Emby software on your PCs, and serve video and music to your laptops, phones, and tablets, and to your TVs via Roku or Chromecast. (See 007 24/7 on Plex Media ServerPoolside fun with Plex remote access, and Media Browser: an alternative to Plex.)

Replace TiVo at a lower or no monthly fee with Tablo DVR or Channel Master DVR+, or Windows Media Center, or freeware like NextPVR. Warning: they all could work for you, depending on your needs, but none are as user-friendly as TiVo. (See RIP Windows Media Center (in 5-8 yrs).)

Save a TiVo-recorded show as an .mpg file, maybe later convert it to .mp4 for Plex use. Thanks to reader JJ’s comment on the previous post, I learned how to do it. I just followed all the steps at the Windows Install link on this page: pyTivo (free server software).

Run free media center software such as OSMC (formerly XBMC) on a Linux-based machine such as the Raspberry Pi. I use my Pi as a front-end presentation for Windows Media Center DVR software running on a network-attached Windows 7 PC. With the free PleXBMC add-on, the Pi also front-ends Plex servers running on other household PCs. In addition, it offers unique free content, such as ESPN3 in HD. The interface is slick and stylish, with many free skins available to radically change the look.

The Pi is flexible and fun, but setting-rich and sometimes frustrating; recommended more for the tinkerer than the casual user. (See previous posts Raspberry Pi computer leads to Atari on Wii“Let’s kill Uncle first!”Windows Media Center & Raspberry Pi, and The missing context button.)


The tool that enabled evolution.

Logitech Harmony 890

Here are a couple of ways I tamed some of the complexity created by adding new boxes and new modes of delivering media to our theater room:

A Logitech Harmony remote eliminated a bucketful of remotes for the all the above devices, plus Blu-ray, receiver, HD radio, VCR, etc. The Harmony online database knows about all your devices by model number, and gives you workable default button settings for all your activities. You can customize to a high degree, and I’ve had a lot of obsessive fun getting it just right for me.

Ultimately, the Harmony unifies and simplifies your TV experience. Best money I ever spent. (See 2014: A Cord-Cutting OdysseyLogitech Harmony 650Cloning the TiVo “Peanut” remote.)

When I can’t remember off-hand which show is where, I look at Our post-cord-cutting TV menu on my smartphone.


The most important lesson I have learned:

Keep the basic TV/DVR system user-friendly and reliable. This maximizes the wife acceptance factor needed to successfully cut the cord.

I enjoy dealing with the complexity entailed by extra functionality, but my wife and many other sane and smart people do not. You can have simple, or complex, or both co-existing as we now do.

As The Keeper of Talos iV (above) thought, “May you find your way as pleasant.”

In the year+ I’ve been writing this blog, we’ve tried a lot of cord-cutting measures. It might be useful to review the ones that were less than totally successful.

Most of the following items could work for others; here’s why they didn’t for us (links to relevant past posts are in parentheses).


1. Mediasonic HomeWorx Digital TV Converter Box with PVR (see Eliminate a cable box)

We bought our 36″ tube HDTV new in 2002 to use with cable. It does not have a built-in TV tuner, so in order to cut the cord, we needed a converter box to get digital TV with an antenna. This particular box cost only $35, and also had the capability of recording shows on a USB drive. I delusionally dreamed this could replace the cable DVR service.

But it was simply too clunky and kludgy as a PVR (DVR) to inflict on my wife. Doing so would probably have dealt a fatal blow to my cord-cutting ambitions. So it moved to the bedroom to serve as a digital tuner only. The price was still good for that use only. I finally traded it to a friend when we replaced the bedroom TV.

2. Cheap Component-to-HDMI converter (see Replace the old TV?)

We had already cut the cord with a TiVo Roamio OTA, but were watching the 36″ tube TV using the lower quality composite input (yellow, red, & white plugs) with TiVo. That was because the TV has only composite, component and S-video inputs, rather than the HDMI needed for the best quality TiVo connection.

I ordered two different HDMI-to-component video converters in succession from Amazon, but neither worked worth a hoot. I learned that the cheapest one on the market that would totally work was the HDFury Gamer 2, and it wasn’t that cheap.

Most people would probably be better served by getting a new TV, but I wasn’t ready to tote that still-working 217 lb. TV to Best Buy for recycling (see Best Buy accepts 3 dead electronics items per day).

3. Raspberry Pi/Windows Media Center PC as DVR (see The Life of (Raspberry) Pi)

I hardly attempted to get my wife to use this; the Pi/Windows combo is not casual user friendly, and is prone to periodic hiccups of various sorts. But I’ve learned a lot from it, and WMC captures TV shows reliably in a format that can be converted to .mp4 (unlike TiVo See JJ’s comments and links below; you CAN pull videos from TiVo with the free pyTiVo program!)

If you have a PC with an HDMI output, you could plug it directly into the TV and use WMC without the Pi. But Windows 8 is the last version to support WMC, so you would be out of luck by 2023, 2020 for Windows 7 (see RIP Windows Media Center (in 5-8 yrs)).

4. Roku Highlights online document (see Our post-cord-cutting TV menu)

This is a list of all the Roku channels with the content of current interest to us. It is in the form of a Google Doc, so I can look at it and update it from tablet, smartphone or browser. The idea was to remind us of all the shows we might watch, and which device or channel they’re on.

It’s fine as MY doc, not so much OURS. Gaye just doesn’t approach TV that way. I do, so I serve as the TV butler, verbally reading from the list when needed.

Since my original post, I have periodically updated the doc and added the content available via Chromecast and Raspberry Pi as well. All to aid my own memory.

5. Antenna placement (see Mohu Sky 60 antenna review & The Riddle of COZI)

(Click to enlarge)

I had the Video Revolution installer place the outdoor antenna on the highest, easternmost point of our house, in hopes of getting the best all-around signals. (He found the height daunting, but if it hadn’t been, I would have tried it myself.)

As it turned out, reception was generally very good. But a few of the higher frequency stations suffered when spring brought foliage and wind. Our street is downhill from the affected stations, so there was no way to put the antenna high enough to avoid the trees.

One other corner of our house might have had a better shot at less obstruction to the east (where a majority of network stations are for us). We don’t know. But it may well have had problems with other stations, even if it slightly improved the Coweta stations.

Ideally, I would have experimented a bit more. But due to the sheer height/steepness of our roof and the lack of attic access, that would have been difficult. With the installer’s meter running, and seeing good reception on all stations that day in March, I locked it in.

This summer, all channels have been consistently good.

6. A|B switch with set-top antenna (see Mohu Curve 50 antenna & COZI in the den)

(Also tried in the spring) The switch selected between the roof-mounted Mohu Sky 60 antenna, and the Curve 50 sitting on the TV. The idea was that when one station’s reception suffered due to the usual factors (wind, trees blocking the signal), another antenna sometimes did a better job.

In practice, it just didn’t work well enough or often enough to mess with it. Not the Curve’s fault; there was just no consistent good placement for it within the space restrictions imposed by the den TV’s location.

7. Hulu Plus (see Streaming video as cable substitute)

In short, we love Netflix, and Amazon Prime to a lesser degree, but Hulu Plus not at all. We dropped it.

After going with a TiVo Roamio OTA as our DVR, Hulu Plus would have been almost superfluous anyway.

A major key to cord-cutting success was reliably delivering daily episodes of “General Hospital” that could easily be rewound, jumped-back, and reviewed, and Hulu wasn’t it.

I found Hulu’s interface poor and the commercials annoying.

8. Powerline to connect a TiVo Mini to the TiVo host box (see The fruits of cord-cutting: new TVs, TiVo Mini, comments)

I successfully used a long Ethernet cable to connect the TiVo Mini in the kitchen to the TiVo Roamio OTA in the den, as recommended. (The other recommended way is MoCA, multimedia over coax.)

I then replaced the cable with a Powerline adapter, a way to send data packets over your house wiring (see Powerline vs. Ethernet wiring). This was an attempt to eliminate the wire.

It worked for a time, but started taking too many errors to be acceptable. I returned to the long Ethernet cable, and did the same when we added another Mini in the theater room.

A Powerline adapter effectively delivers internet access to the Roamio, and thus to the Minis too, but it isn’t quite up the job of moving the video data.

9. Finding ways to provide the cable shows my wife can’t live without (or just wants)

I was really worried about this, so I tried a number of things:

— Plex channels (see Free Plex channels = cable substitutes? and NBC/msnbc discontinuing video podcasts)

— VCRing  a lot of “Survivorman” before cutting the cable.

— Plex personal media content (see  007 24/7 on Plex Media Server) such as my wife’s favorite Sunday night shows, “Keeping Up Appearances” and “Fawlty Towers”, and Saturday fave, “The Outer Limits”. I also ripped our favorite movies from DVD for Plex.

Of those three items, only the latter proved to be of use to her.


The things that DID work will be in a future post. A high wife acceptance factor (WAF), as always, is primary.

Google Chromecast with HDMI extender cable, microUSB to USB cable, USB power supply.

We didn’t need the Chromecast device since we already have several Rokus to watch Netflix, Amazon Prime Instant Video, YouTube, Crackle, Plex, etc. (Chromecast can handle all these except Amazon; Google doesn’t like to accommodate their competition.)

We still don’t really need it, except for one purpose (so far).

After cutting the cable TV cord, I was still able to watch msnbc’s “Morning Joe” program on the Roku’s Plex channel. (The video podcast, found on a special Plex msnbc “subchannel”, typically became available in the afternoon, or the next day.)

But ten days after cutting the cord, up popped a message from NBC that the video podcast would be discontinued ten days hence. What a kick in the head.

There was and still is an audio podcast of the show, and it can be listened to on Roku’s “iTunes Podcasts” channel. But it’s not quite the same.

I then discovered a European website that streams msnbc International 24/7 in an embedded Flash player. It has the same content as the cable channel, which is very good. But it has no commercials, which is very bad. Say what?! Yes, commercials are preferable to the repetitive, horn-tooting show promos which appear instead of commercial breaks.

Still, the entire “Joe” show can be watched in real time on a web page.

I considered buying a Mohu Channels device as a way to get the page onto a bigger screen, but was put off by the cost, and the need for a special remote to move the cursor around. I didn’t need its other features, having settled on the TiVo Roamio OTA for my wife in the den. and Windows Media Center/Raspberry Pi/Roku for me/us in the theater room. I was also unsure it would work well enough for this purpose.

For awhile, I watched the show in a browser window on the side of my laptop’s screen. Not ideal, but better than an audio podcast.

Next, after my wife moved up to an iPhone and iPad, I inherited her Android phone and tablet. Both devices did a good enough job going full screen on the Flash player, and the tablet’s case doubled as a stand. So I could now watch the show on a separate device. But the promos still drove me crazy, since muting is inconvenient with a small device.

It finally dawned on me that the Google Chromecast might be the simplest and cheapest way to get a web page up to the big screen. Since we had gone with Roku quite awhile back, I had forgotten that the Chromecast is capable of casting a tab from the Chrome browser to the TV. I checked, and Chromecast could handle Flash.

The mailman soon brought one.

The little dongle plugs directly into an HDMI slot on your TV (or if you have as many devices as I do, into an HDMI switch.)

The Chromecast is powered by AC adapter, or by USB if you have a USB port handy on your TV or other device (I plugged into the powered USB hub I use with the Raspberry Pi, which is both powered by the hub and connected to other devices by it.)

Download the free Google Chrome browser on your PC. Once you have it, install the free “Google Cast” extension (see Chrome’s Settings/Extensions/Get More Extensions).

Then go to the page you want to cast, and click the little “cast” icon on the upper right to send the page up on the big screen.

To view an embedded video (Flash player, YouTube, Vimeo, etc.) on the page, click the fullscreen icon on the video. You will now see the video fullscreen on your TV.

On my first try, the video was very choppy. I suspected this was due to the fact that it had to be transmitted from the laptop to the wifi router, then again by wifi from the router to the Chromecast device. (We have an old 802.11g router.)

So I tried casting from the office computer, which is Ethernet-attached to the router. With only one wireless hop to the Chromecast, it worked much better. The video only occasionally was not perfectly smooth, though I have seen a freeze or two.

The video quality is about that of the Cox analog channels, which only this month disappeared for good. Very decent quality for a talking-heads news show.

Sometimes, the audio is not in perfect sync, though acceptable to me. This happens on the PC even when not casting. Further Googling leads me to believe that Flash player sync has been a problem for years, and mainly has to do with settings on the server side. So, nothing more I can do about it.

I figured that if the Chromecast were connected to the router by Ethernet (or by Powerline as we have it set up), the occasional stutter might be cured. There is a $15 Ethernet adapter for Chromecast, so I ordered one. Just got it today. So far, no stuttering.

One final hurdle: who wants to get out of the Laz-E-Boy and go into the office to change channels? (CNN and CNBC are available online, too, though not as is Fox News.)

My solution: Download and activate the free TightVNC server software on the office computer. (I already had given the PC a fixed IP address, which is needed to run the software.) On phone and tablet, I downloaded the free Remote Ripple app, which is TightVNC’s client software.

Smartphone screenshot: office PC remote-controlled from smartphone. Hmm, stock market tanked. Time to buy!

After I set it all up, I took over the office PC’s desktop with the smartphone. Using Remote Ripple’s virtual mouse, I brought up the PC’s Chrome browser and clicked my bookmark to the webpage. Then I clicked the tiny little cast button on the browser to get it onto the TV.

Finally, I clicked the fullscreen icon on the Flash player. Voila! The show is on the big TV.

So I now need a smartphone in the theater room to control the office PC, but I typically have one close by, anyway.

My other remote (Logitech Harmony 890) makes it easy to mute Joe’s many mind-numbing, promo-laden breaks.

There are more conventional ways to use Chromecast, to be detailed in a future post.

(PS, another way to use the new setup is get Alan Lambert’s new radio show, “Big Band American Songbook”, onto the big sound system. Listen Saturdays at 8 pm on The Grid, TCC Student Radio online.)

(PPS, yet another use: after I finish a workout accompanied by a smartphone plugged into a boombox, I can go to the theater room and cast whatever music program I was listening to onto the big sound system, from exactly where I left off.)

iHome portable speaker and wifi-only smartphone with Plex app running.

iHome portable speaker and wifi-only smartphone with Plex app running.

Yesterday, I visited a friend with a swimming pool at his house. To provide musical entertainment, I took along my wifi-only Samsung Galaxy Note II smartphone (formerly my wife’s), and a portable iHome rechargeable speaker.

All my music content is currently stored on my laptop at home.

As described previously, the laptop and a couple of other household computers are running the Plex server software. That allows stored music, TV shows and movies to be played by devices running Plex client software. Up until recently for me, those devices were the Roku boxes and the Raspberry Pi running PleXBMC software.

But other devices can be Plex clients, too, such as a browser, a smartphone or a tablet.

With the free Android Plex app on my smartphone, the phone can play my music in the workout room or out on the patio via our private wifi network.

However, it can also work at remote locations, like my friend’s pool.

To achieve this, you must enable remote access on the Plex server. Here are the directions: Enabling Remote Access for a Server, and if needed, Troubleshooting Remote Access. This can be tricky, depending on your router. With my old warhorse Linksys WRT54G, I had to do Manual Port Forwarding as described in the second link to make it work.

The result was delightful. My phone had internet access via my friend’s wifi. I had used my DIY radio recorder to capture “All This Jazz” from KWGS the night before (I could have selected any of my music content). At poolside, I started the show and it streamed from the laptop in our house, 3 miles away. It played until it was time to go.

Just for kicks, I kept the music going in the car to see how long it would last after losing wifi access. I got to 61st & Memorial, still going. 71st & Memorial, still going. Got home, still going! Checked the phone, and it had reestablished access to our wifi and continued to play on.

Evidently Plex buffered at least 10 minutes of the show. You may recall that I chop the three-hour program into twelve 15-minute segments for convenience with Roku, where you can’t “rewind”. (Reminds me of an 8-track player when it switches to the next track.) Did Plex buffer an entire segment, or more? I don’t know.

But it is a lot of fun to use. All of this fits into a sandwich bag for safe and cheap transport to and from poolside.